CatII inflation.

[kinda_hung]

So I was using a YSC and a balloon for a while and was getting good results. Then I decided to utilize my CATII. I've never been really happy with it using it with the push rod. Seemed like the tension was minimal and since I'm very active at work the baby nipple would come loose.

So. I took the plunger out of the body. Put a balloon on a 1/4" line. Put the line through the hole and put a one way valve on it. I get tons of tension. Extremely comfortable. And it hardly ever slips off. Only if I over tension and my skin eventually pulls loose. I just bring a longer piece of airline in my pocket to retension after using the bathroom. One thing you have to do is use a little water on your glans and inner skin so the balloon can slide into place while tensioning.

Pics to come.
http://www.foreskin-restoration.net/forum/attachment.php?attachmentid=5795&stc=1&d=1326056296
http://www.foreskin-restoration.net/forum/attachment.php?attachmentid=5796&stc=1&d=1326056296
http://www.foreskin-restoration.net/forum/attachment.php?attachmentid=5797&stc=1&d=1326056296

[maxximus1966]

I also use the CAT IIQ and am very interested in your new method. I look forward to pics showing in greater detail what you have come up with!

[kinda_hung]

I also use the CAT IIQ and am very interested in your new method. I look forward to pics showing in greater detail what you have come up with!

It's really simple. Take a 3" piece of airline and slide a small balloon over the end of it. Take a rubberband and wrap it around until tight. Put opposite end that balloon is on through the hole of the CatII. Wet glans and inner skin with water. Put CatII on glans. Roll skin forward and secure with nipple. Put one way vale on. Attach hose to end and blow!