PDA

View Full Version : DTR comfort


italiano71x
July 19th, 2010, 05:11
This is for all DTR users.
I started to use my new DTR two days ago (one or two elastics + manual tensioning), but I had to stop because my skin hurts! A red spot with some pus inside appeared in the sulcus near the glans, appearently caused by attrition.
Another problem is that gripped skin usually becomes red and hurts too, or slip away from the gripper.
I decided to stop restoring and apply some Gentalyn beta until the problems disappear.
Any advice for me when I start again my restoring? many thanks.

ctrclckws
July 19th, 2010, 05:27
Stopping until your skin recovers, GOOD.

When you start again, Apply the device with ZERO tension and build up from there.

Personal note: When I tried the DTR, I couldn't use the grippers as supplied with holes. Those holes hurt me to the point that I could use it for a long period. Try to find the bottle nipples and cut them down for use without holes. especially if thats where your sore developed, at the hole.

darkpassenger
July 19th, 2010, 05:51
You need to stop and recover first, like ctrclckws said. Never over-do it. It won't make it go any faster.

I have a DTR as well, but have never had any luck with the gripper part. I took that piece off. I feel I have better luck when I roll the skin over the device and apply a small piece of medical tape on my skin around the bottom (not touching the DTR). Then I stretch. I find I can adjust my skin easier that way. I don't like things that cover up the skin as I want to see the skin so I can check for any problems (pinching etc.). Blood-flow is good. Good luck.

buck3040
July 20th, 2010, 20:29
I had to build up my time too. I wore it around the house when I first got it so when it started getting uncomfortable it came off for awhile (and on...) After doing this for about a few weeks I was able to wear it to work. After a few hours I do go to the washroom (still) just to make sure it's ok. (Call me paranoid, but if it starts getting uncomfortable I just want to look and make sure all is ok). Hope that helps.

Arthur
July 20th, 2010, 22:27
I use my DTR 99% of the time I'm restoring, in the beginning mine hurt too. I found swapping to the shorter rod, wearing VERY loose underwear (really loose boxers, if any), and making sure I don't have any wrinkles trapped under the gripper really helps alleviate any discomfort. Also if you have any sort of frenulum left (I have most of mine), the pusher with the notch is a MUST. I've been restoring with it since Feb or March, can't remember exactly when I started.

admin
July 21st, 2010, 00:16
Hi,
I would like to remind our guests that thread subject lines are indexed by Google and others. Long after you've solved a problem, the headline statement of the problem may persist in search engine results.

So when the headline emphasizes pain or pinching or something, we may be impacting future restorers' opinions in ways we wouldn't wish to.

I'd rather see something like Device Comfort as a subject line. We all know there are lots of DTR users who don't have pain if they get a good fit and proper application.

Every TLC device is now custom sized for the user. Just supply your glans width (flaccid and erect, measured at the widest point with a straight ruler from side to side http://TLCTugger.com/YSC-size.htm) and your Forced Erect Coverage (the percent of your glans you can temporarily force skin over while erect, or the distance past the tip you can temporarily force skin while erect, see http://www.foreskin-restoration.net/forum/showpost.php?p=13490&postcount=1) and we will fit you like a glove.

-Ron Low
http://TLCTugger.com
847 414-1692

italiano71x
July 21st, 2010, 03:28
I'm really sorry... I didn't think about that! I restarted the use of my DTR and I found out that probably the problem was caused by applying too much tension. I still go on thinking that DTR is a really good device.

Cut and Unhappy
July 21st, 2010, 18:08
Have you used anything else before? I have only used the TLC Tugger, and I also had the problem with a puss filled sore spot (sounds way worse when you describe it, eh?). It seems that as the skin wasn't used to being covered by silicone and usually stays outside and breathes, it caused a pimple there. I fixed that by waiting 'til it was all gone before I put the tugger on because it even hurt with no tension, then started putting it on longer each day. I haven't had any problems since.
And even if you have used something before, maybe a bi-directional device causes the skin to be pushed harder against the device than a TLC would. That would cause the same problem as you are once again keeping it covered more than you are used to.

Cut and Unhappy
July 21st, 2010, 18:10
I also started using facial soaps used for acne treatment to wash my penis. It is rare to find one that is moisturizing, and it prevents pimples if you are prone to getting them.

Arthur
July 22nd, 2010, 02:13
I also started using facial soaps used for acne treatment to wash my penis. It is rare to find one that is moisturizing, and it prevents pimples if you are prone to getting them.

Make sure you're only washing your outer skin with that. Acne washes are going to be way too drying to the glans and inner skin which will only increase discomfort in the long run.

Xamire
June 2nd, 2012, 04:50
This is for all DTR users.
I started to use my new DTR two days ago (one or two elastics + manual tensioning), but I had to stop because my skin hurts! A red spot with some pus inside appeared in the sulcus near the glans, appearently caused by attrition.
Another problem is that gripped skin usually becomes red and hurts too, or slip away from the gripper.
I decided to stop restoring and apply some Gentalyn beta until the problems disappear.
Any advice for me when I start again my restoring? many thanks.

Sounds like you're wearing it too long, and with far too much tension. Yes your penis will ache a bit after usage, but it shouldn't ache much, and for very long. But it sounds like you're being a bit overzealous. Drop it down to the 6 inch rod with one band, and only wear it for a few hours, and take an hour or so break in between. You also might need to order the Advanced Push Plate (http://www.foreskinrestore.com/push_plate.html) as well, which you can order from this page (http://www.foreskinrestore.com/parts_order.html). Use a damp cloth to clean the gripper and your skin of extra oil. You will have some redness, and even purple or brown for some. It will heal, you are stretching skin, slowly, moderately over time, forcing your body to "fill in the gaps" between stress marks.

For healing, get triple antibiotic ointment, and hyrdocortisone cream and use them on the areas that are sore, so they heal fast. Lay off restoration until you heal.

qobi7
June 18th, 2012, 12:37
To add my 2 cents for new DTR users, it is definitely a device that you have to work up to, in my opinion. I started with the original TLC Tugger for about 6 months before I was able to use a bi-directional device (starting with a borrowed CATII, then bought my own DTR). At first, I was only able to wear it for short periods. Even now, after almost two months, I still have to give it a 10-20 minute break every two hours or so. It is mainly the skin under the gripper that starts to pinch (with some pain) and just needs a breather.
I've also found that adjusting the gripper after applying it to pull out most of the skin, leaving the least amount of skin under the gripper (but still enough to get a good grip) really helps. This also frees more skin to be stretched (since everything bunched up under the gripper is actually being compressed, not tugged). I do the same adjustment process with my TLC Tugger, mainly to maximize the amount of skin being tugged.
Good luck and keep at it!!

Anew66
September 3rd, 2012, 07:05
For healing, get triple antibiotic ointment, and hyrdocortisone cream and use them on the areas that are sore, so they heal fast. Lay off restoration until you heal.

Carefull with hydrocortisone, there is a lot of scientific evidence that it prevents cell growth, cf

xxxx://onlinelibrary.wiley.com/doi/10.1111/j.1440-169X.1985.00729.x/abstract

Runsfromknives
September 30th, 2012, 14:38
My DTR gets uncomfortable after a few hours, sometimes even after 1 hour. When I first started using it, it was worse.

Also about using soap on your penis to dry it out for more grip... I know that using soaps on your face that really dry the skin will actually cause your pores to excessively produce more oil. The cure for some peoples acne is to moisturize. It could be that soaping up your penis is really just causing it to produce more oil.

Also,if your penis gets injured, let it heal up completely before continuing. The last thing you want is more permanent damage.

Mc_Nugg
November 14th, 2012, 12:27
I have a related question

Tomorrow will be 2 months of using the DTR. I was a CI-1 when I started. Now, I'd say I'm like a 1.5. I have been using the DTR in tugger mode because I did not have enough slack skin to use bi-directional mode. Just yesterday, I tried bi-directional mode and I can get it on there now but just barely. Also, without even pushing the plate in, it is already forcing my glans in about an inch into my shaft. Without the device on, I am only able to roll the skin up on to my corona without pushing the glans in. Is it dangerous to push your glans in to your shaft that far? It feels sorta uncomfortable. I am just really anxious to be able to use the DTR that way. Thanks

Frankenweenie
November 14th, 2012, 12:54
I have been using a TLC-X but wanted to give the DTR a try. I got it in the mail yesterday and tried it out. I found the holed gripper very painful, so I swapped out for the non-holed one. That was better, but I couldn't keep it on for more than a couple of hours. Yet, I can wear the TLC-X all day.

The funny thing is, that I have the DTR Retainer which I have been using for air inflation and find it far more comfortable than the DTR. The retainer has a slightly bigger gap between the gripper and the bell, which is probably why it seems to pinch the skin much less. I wish I had a lathe to trim the bell down a bit.

A member on another forum modified his gripper by making a couple of 1/4" slits on the bottom edge. He says that made it more comfortable but still grips well. I may have to give that a try to see if that will help.

Another quick observation on the DTR, is that it is way bulkier than the TLC-X. I find it more noticeable under clothing. People seem to rave about the DTR, so I will give it a good try out to see which device will work out better for me for the long term.

seattledon
November 20th, 2012, 16:45
I have had the DTR for a couple days now and am getting used to it.
I struggle with getting it on good but it stays when on right.
I also ordered a CAT IIQ and hope it is less bulky.