Foreskin Restoration Endo Device

[regencybrougham]

I have been using the Foreskin Restoration Endo Device for the last few days.

It is a stainless steel weight, but it comes in three pieces, and is tapeless. You can use just the nose cone (5.25 ounces), the nose cone plus another large piece (3.5 ounces I think), or all three pieces which includes an expansion plate which I think is about 1.5 ounces. It is also further expandable by the use of additional expansion plates (not included).

The pieces are held on by grippers made of a thin material like a baby bottle nipple but much thinner.

It also comes with a screw for the tip which has a ring in it and a lanyard for use as a tugger.

So far I have just been using the nose cone because I do not yet have enough skin to use the other two parts.

I got it off ebay after seeing it on restoringforeskin.org, but I was emailing with the the seller today regarding my feedback about the device and he said he has more parts on order.

I have wanted to try a weight but have been turned off by the tape requirement. This device doesn't require tape and so I tried it. I am pleased with the device.

[admin]

Originally Posted by regencybrougham

I have been using the Foreskin Restoration Endo Device for the last few days.

It is a stainless steel weight, but it comes in three pieces, and is tapeless. You can use just the nose cone (5.25 ounces), the nose cone plus another large piece (3.5 ounces I think), or all three pieces which includes an expansion plate which I think is about 1.5 ounces. It is also further expandable by the use of additional expansion plates (not included).

The pieces are held on by grippers made of a thin material like a baby bottle nipple but much thinner.

It also comes with a screw for the tip which has a ring in it and a lanyard for use as a tugger.

So far I have just been using the nose cone because I do not yet have enough skin to use the other two parts.

I got it off ebay after seeing it on restoringforeskin.org, but I was emailing with the the seller today regarding my feedback about the device and he said he has more parts on order.

I have wanted to try a weight but have been turned off by the tape requirement. This device doesn't require tape and so I tried it. I am pleased with the device.

That looks very nice.

In all cases when wrapping your skin around a heavy weight you must be very careful not to accidentally bang your penis into furniture you walk past. The corner of a desk could literally make you bleed.

-Ron

[regencybrougham]

I have been using the FRED for over a week now. Still liking it very much.

I usually use my HART in the morning, say from 9:30-12:30, take a break, use FRED from 1:15-5:00 pm. I usually leave the devices off for 15 minutes or so after a bathroom break, then replace them. I usually use the HART in the evening.

I believe that using more than one method is beneficial, as I have read from other restorers. Since using the HART and FRED in combination, my progress really seems to have increased.

(edit- Thanks, Ron. Luckily, at work I use a desk with an electric motor which allows me to raise or lower the desk to sitting or standing height. I always have it at standing height while using this device.)

[airpud]

this looks awesome. i'd use it.

[photenman]

Originally Posted by regencybrougham

I have wanted to try a weight but have been turned off by the tape requirement. This device doesn't require tape and so I tried it. I am pleased with the device.

You probably know, but you can buy weights for the TLC-X and the TLC-Air. 5/8 ounce is standard with an 8 ounce and small add-on weights also available. They are very comfortable.

What is nice about F.R.E.D. is it is in your skin tube and you can keep adding to the system and it is versatile. The weight is not all on the outside. I can easily wear 12.5oz all day and feel comfortable changing my clothes at work without things hanging out. For my job discreetness is important.

Will try to post some photos as I am learning to navigate this system.

[regencybrougham]

I'm still using the FRED, still enjoying it and making progress toward my goal. Looks like the kit has been updated slightly since I got mine.

Glad to hear F.R.E.D. is also working for you.Yes, I added a stainless steel screw at the end. In addition I was able to get these carrying cases online for the same price as your compartment storage unit you received , I think it will be a compact bag good for travel. I also had the top piece manufactured with the two threads communicated by a 1/8" hole to allow for inflation capabilities I am working on. You will be able to drill a small hole if you choose to add an inflation capability.Unfortunately stainless steel prices went up since original pieces made. Will hopefully have the inflation system up and going soon. Will simply require a set screw with a center vent hole. Thanks

I want to say in previous post with pictures the bottom one to left shows an extra middle (expansion) plate this is not part of the kit. You can get additional middle plates to make longer or add weight. Will try to load more pictures. These pictures show the versatility with configuration of the unit. In addition you can use Ron's cones if you like or any other cone as the top piece can handle several different ones.