Foreskin Restoration / Intactivism Network

Go Back   Foreskin Restoration / Intactivism Network > FORESKIN RESTORATION > METHODS > - Bi-Directional Tensioning
Register FAQ Members List Calendars Search Today's Posts Mark Forums Read

- Bi-Directional Tensioning TLC-X, CAT II, DTR

Reply
 
Thread Tools Display Modes
  #1  
Old January 28th, 2014
Just_4_looks Just_4_looks is offline
Junior Member
 
Join Date: Nov 2013
Location: Christchurch, New Zealand
Posts: 11
Default Size of pusher

Hi Gents,
just interested in the pusher size

I use my own device, and the pusher plate is 25mm diameter. I am considering making a larger one, closer to the size of my glans.
I have looked down my skin tube and my glans seams to fold inside out over the pusher plate.

I think I am losing tension on my skin area due to this?

what size are your pushers?

I have seen the pushers with a wedge cut out for frenulum

what if I make it the same size as me glans?
Reply With Quote
  #2  
Old January 28th, 2014
greg_b greg_b is offline
Administrator
 
Join Date: Oct 2007
Location: Delaware, US
Posts: 5,223
Default Re: Size of pusher

Since tension triggers cell division and you are targeting the skin, this seems less than optimal. And some research suggests that the edge of the pusher would be wear the greatest tension is, and thus maximum triggering.

I always have used a pusher about the size of my shaft when erect. It has not been a problem as far as I can tell.

Regards
__________________
Greg B.

"The foreskin isn't the wrapper...it's the candy!"
Reply With Quote
  #3  
Old January 28th, 2014
LiegeOfInveracity LiegeOfInveracity is offline
Senior Member
 
Join Date: Jan 2007
Location: Zanzibar
Posts: 231
Default Re: Size of pusher

Best pusher design I've used is the DTR Advanced conform push plate.
Reply With Quote
  #4  
Old January 28th, 2014
admin admin is offline
Administrator
 
Join Date: Sep 2006
Posts: 8,209
Default Re: Size of pusher

Quote:
Originally Posted by Just_4_looks View Post
Hi Gents,
just interested in the pusher size

I use my own device, and the pusher plate is 25mm diameter. I am considering making a larger one, closer to the size of my glans.
I have looked down my skin tube and my glans seams to fold inside out over the pusher plate.

I think I am losing tension on my skin area due to this?

what size are your pushers?

I have seen the pushers with a wedge cut out for frenulum

what if I make it the same size as me glans?
I feel like Pusher length is a way to fine-tune overall device length, and the point of doing that is to let a specific preferred spot along your skin tube serve as the induced roll-over point at the narrowest part of the device. The reason or advantage to choosing such a point is that if you keep it constant you can know that the chosen spot will never grow baggy as a result of your tissue expansion. It may even wind up more puckered than when you started. This is discussed in detail (including a formula for helping you identify which spot to target) here: http://Foreskin-Restoration.net/foru...2&postcount=44

-Ron
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 19:33.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.